Problèmes courants électriques soudures fer
1. The electric soldering iron does not heat up after being energized
Si le soudage fer ne pas chauffe haut après être alimenté on, it signifie que le soudage fer a an ouvrir circuit défaut. This fault may occur at the plug of the solder iron in several places. The solder iron core is broken, the lead wire of the soldering iron core is broken, and the power cord of the solder iron is broken.
2. Le pointe de la soudure fer fait pas manger étain
Do not eat soldering iron tip "Tin Pu sees that the newly purchased soldering iron tip is used directly without trimming, resulting in no tinning of the soldering iron tip. The soldering iron tip that has been used for a long time is not tinned, and the soldering iron tip is burnt to death and needs to be repaired.
3. Le électrique brasage fer est chargé
Electric souting iron is très dangereux pour soudage personnel, et grave électrique choc accidents se produiront se produiront. Therefore, once the electric soldering iron is found to be electrified, the power supply should be cut off immédiatement for inspection. There are several reasons why the electric soldering iron is électrified. Le cordon de le électrique brasage fer est connecté à le terminal de la mise à la terre fil; le cordon puissance chute de de le terminal de la soudure fer noyau et alors touche le vis de la mise à la terre fil, cause le électrique puissance plomb fil de le soudure fer tête à être enchevêtré et cause fuite; Le pouvoir terre lui fuites électricité.
4. There are pits on the tip of the soldering iron
Quand le électrique soudure fer est utilisé pour une période de temps, fosses ou oxydé corrosion couches apparaîtront sur les soudures fer pointe, les changements la forme de la lame surface de la soudure fer pointe. In this case, the oxide layer and pits can be filed off with a file, and filed into the original shape, and then tinned, and then it can be reused reused.
How long does a soldering fer heat up
The power of a 60w soldering iron is very high, but the soldering iron general needs to be preheated for 3-5 minutes. Alwhile you may see it getting hot and smoking, it may not have reach reach the melting point of solder. The warm-up time of the soldering iron is also related to the use environment. The warm-up time will be longer in an environment with high wind and low temperature. It is recommended to take some protection measures for the soldering iron (such as adding a sleeve) to ensure that the solder iron can last. Gather heat to reach a certain high temperature.
Le nouveau électrique soudure fer aura avoir un peu fumée et particulier odeur quand utilisé pour la première fois. There is a layer of anti-oxidation paint on the solder iron, which should be wiped off softly before use. For the first use, the solder should be fully fed to the tip of the solder iron, so that it fully absorber the tin and then solder.
